POWERTRON ELECTROPLATING RECTIFIER

Product Details:

Features:

• Wide input supply range
• Built in EMI filter, low ripple noise
• Protection: Short circuit / Over load / Over voltage
• 100% Full Load Burn in test
• High efficiency, long life and high reliability
• Miniature size 

• All parameters NOT specially mentioned are measured at Typical input, rated load and 25 Deg. C ambient temperature
• Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uF & 47uF parallel capacitor
• Tolerance includes set up tolerance, line regulation and load regulation
• The power supply is considered a component which will be installed into final equipment. The final equipment must be recon formed that it still meets EMC directives
• Specifications are subject to change with out prior notice due to constant improvement in design & technology

• EMI & EMC: Designed to meet EN55011 / EN55022, EN61000-4-2
• Isolation Resistance: I / P - O / P , I / P- Earth, O / P-Earth: 100MOhms / 500VDC
• With Stand Voltage: I / P - O / P 2KVDC , I / P- Earth, O / P-Earth 2KVDC
• Safety Standard: Designed to meet UL60950-1
• Vibration: (-10 To 500 Hz, 2G, 20min / Sweep, Period - 1 Hr, Each along X,Y,Z axes.)
• Storage Temp./Humidity: (-10 To 85 Deg C 10 To 95% RH )
• Working Humidity: 20 To 90% RH Non Condensing.
• Over Voltage: 125% - 150% Rated Output Voltage, Protection Type : Hiccup Mode , Recovers automatically after fault condition is removed.
• Overload: Above 105% Rated Output Power, Protection Type: Constant Current, Recovers automatically after fault condition is removed.
• Voltage Adj. Range: 0 to 20V DC
• Current Range: 0 to 220A 

Additional Information:

• Delivery Time: 15-20DAYS